RX 330 AWD V6-3.3L (3MZ-FE) (2004)
TORQUE:
7.0 Nm (71 kgf.cm, 62 in.lbf)
(b)
Reinstall the bolt for the resonator assembly.
27.
REINSTALL THE AIR CLEANER INLET NO. 2
(a)
Reinstall the 2 bolts and the air cleaner inlet No. 2.
(b)
Reinstall the vacuum hoses into the hose clamps.
(c)
Reinstall the 2 wire harness clamps.
(d)
Reconnect the VSV connector.
28.
REINSTALL THE COOL AIR INTAKE DUCT SEAL
(a)
Reinstall the 4 clips and cool air intake duct seal.
29.
RECONNECT THE OIL COOLER OUTLET TUBE NO. 1
30.
RECONNECT THE OIL COOLER INLET TUBE NO. 1
31.
RECONNECT THE RADIATOR HOSE OUTLET
32.
RECONNECT THE RADIATOR HOSE INLET
33.
REINSTALL ENGINE ROOM SIDE COVER
(a)
Install the engine room side cover with the 4 clips.
34.
REINSTALL THE BATTERY TRAY