RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Valve Clearance: Adjustments
VALVE CLEARANCE
ADJUSTMENT
1. DRAIN ENGINE COOLANT
2. REMOVE FR WIPER ARM RH
3. REMOVE FR WIPER ARM LH
4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSY
5. REMOVE WINDSHIELD WIPER LINK ASSY
6. REMOVE COWL TOP PANEL SUB-ASSY OUTER
7. REMOVE ENGINE UNDER COVER ASSY (W/ ENGINE UNDER COVER ASSY)
8. REMOVE ENGINE UNDER COVER NO.1
9. REMOVE FRONT FENDER APRON SEAL RH
10. REMOVE V-BANK COVER SUB-ASSY
a. Using a socket hexagon wrench 5, remove the 3 nuts.
b. Remove the V-bank cover.
11. REMOVE AIR CLEANER CAP SUB-ASSY
12. REMOVE EMISSION CONTROL VALVE SET
a. Disconnect the 2 VSV connectors.
b. Remove the wire harness clamp.
c. Disconnect the fuel vapor feed hose No. 1.
d. Disconnect the fuel vapor feed hose No. 2.
e. Disconnect the 2 vacuum hoses.
f.
Remove the clamp.
g. Remove the 2 nuts, then remove the emission control valve set.
13. REMOVE INTAKE AIR SURGE TANK