RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Audible Warning Device: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool
CHECK DTC
Checking DTCs.
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch ON.
3. Read DTCs by following the prompts on the tester screen.
HINT: Refer to the hand-held tester operator's manual for further details.
With Generic Scan Tool
LEXUS does not provide a procedure for Reading Trouble Codes With Generic Scan Tool.
Without Scan Tool
LEXUS does not provide a procedure for Reading Trouble Codes Without Scan Tool.
With Manufacturer's Scan Tool
CLEAR DTC
Clearing the DTCs.
1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch ON.
3. Erase the DTCs following the prompts on the tester screen.
HINT: Refer to the hand-held tester operator's manual for further details.
With Generic Scan Tool
LEXUS does not provide a procedure for Clearing Trouble Codes With Generic Scan Tool.
Without Scan Tool
LEXUS does not provide a procedure for Clearing Trouble Codes Without Scan Tool.