RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-351002.png)
HINT:
-
"New belt" refers to a belt which has been used on a running engine at idling for 5 minutes or more.
-
"Used belt" refers to a belt which has used on a running engine at idling for 5 minutes or more.
-
Check that the drive belt fits properly in the ribbed grooves.
4. FULLY TIGHTEN V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
a. Tighten the bolt A.
Torque: 18 Nm (183 kgf.cm, 13 ft.lbf)
b. Tighten the bolt C.
Torque: 58 Nm (591 kgf.cm, 43 ft.lbf)
