RX 330 AWD V6-3.3L (3MZ-FE) (2004)
g. Turn the crankshaft 2 revolutions slowly and align the timing mark of the crankshaft timing pulley with the oil pump body.
NOTICE: Always turn the crankshaft clockwise.
h. Check the timing marks of the RH and LH timing pulleys are aligned with the timing marks of the No.3 timing belt cover as shown in the
illustration.
If the marks do not align, remove the timing belt and reinstall it.
i.
Remove the crankshaft pulley bolt.
24. INSTALL TIMING BELT GUIDE NO.2
a. Install the timing belt guide facing the cup side toward the engine front.
25. INSTALL ENGINE MOUNTING BRACKET RH
a. Place a wooden block on a jack underneath the engine.