lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3680 > < Initial Inspection and Diagnostic Overview|Page 3678
Page 62
background image

If voltage is below 11 V, recharge the battery before proceeding.

CAN Communication System

TERMINALS OF ECU

HINT:  This section describes the standard CAN values for all CAN related components.

1. WIRING HARNESS CONNECTOR (CAN J/C1, CAN J/C2).

Terminals Of ECU

a. CAN J/C1.

1. Distinguish the CAN J/C1 connectors by the color of the bus lines and the location of the connector.

NOTE:  Confirm the side of the connector (A side or B side) where the wires are connected. All terminals on the same side work equally.

b. CAN J/C2.

1. Distinguish the CAN J/C2 connectors by the color of the bus lines.

Initial Inspection and Diagnostic Overview|Page 3680 > < Initial Inspection and Diagnostic Overview|Page 3678