RX 330 AWD V6-3.3L (3MZ-FE) (2004)
8. REMOVE WINDSHIELD WIPER LINK ASSY
9. REMOVE COWL TOP PANEL SUB-ASSY OUTER
a. Disconnect the rain sensor connector. (w/ Auto Wiper)
b. Remove the 2 wire harness clamps.
c. Remove the grommet.
d. Remove the 6 nuts, and then remove 2 front shock absorber caps. (w/ Air Suspension)
e. Remove the 4 set nuts of the shock absorber. (w/o Air Suspension)
f.
Remove the 4 bolts and 2 nuts, and then remove the cowl top panel outer.
g. Tighten the 6 set nuts of the shock absorber.
Torque: 80 N.m (815 kgf.cm, 59 ft.lbf)