RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Fuel Supply Line: Service and Repair
Removal & Installation and Disassembly & Reassembly
1. DISCHARGE FUEL SYSTEM PRESSURE
2. REMOVE DECK BOARD SUB-ASSY
a. Disengage the 5 clips and turn up the front side of the deck board.
3. REMOVE REAR SEAT TRACK BRACKET COVER OUTER
4. REMOVE REAR SEAT TRACK BRACKET COVER OUTER
5. REMOVE REAR SEAT ASSY RH
6. REMOVE REAR SEAT ASSY LH
7. REMOVE REAR DOOR SCUFF PLATE LH
8. REMOVE DECK SIDE TRIM COVER LH
9. REMOVE REAR SEAT SIDE COVER LH
10. REMOVE REAR FLOOR SERVICE HOLE COVER
a. Using a clip remover, remove the 3 clips and tear off the front floor carpet.
b. Remove the rear floor service hole cover.
c. Disconnect the fuel pump connector.
11. REMOVE FUEL SUCTION TUBE ASSY W/ PUMP & GAGE