RX 330 AWD V6-3.3L (3MZ-FE) (2004)
24. INSTALL FUEL SUCTION PLATE SUB-ASSY
a. Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the fuel tube joint No.1.
b. Apply a light coat of gasoline or spindle oil to the O-ring again, and install the fuel suction plate to the fuel suction support No.1.
25. INSTALL FUEL SENDER GAGE ASSY
26. INSTALL FUEL SUCTION TUBE ASSY W/ PUMP & GAGE
a. Install a new gasket to the fuel tank.
b. Attach the fuel suction tube w/ pump & gage to the fuel tank.
NOTE: Be careful not to bend the arm of the fuel sender gage.
c. Align the keyway of the fuel suction tube support with the key of the fuel suction tube w/ pump & gage.
d. Align the triangle mark on new fuel pump gauge retainer with the "S" mark on the fuel tank while pushing down the fuel suction tube w/ pump
& gage, attach the fuel pump gauge retainer.