RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1456013.png)
-
When scrapping a vehicle equipped with SRS or disposing of the front seat airbag assy LH, be sure to deploy the airbag first in accordance with
the procedure described below.If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT.of TOYOTA MOTOR
SALES, U.S.A., INC.
CAUTION:
-
Never dispose of the front seat airbag assy LH that has undeployed airbag.
-
The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby
residents.
-
When deploying the airbag, always use the specified SST(s) (SRS Airbag Deployment Tool).Perform the operation in a place away from electrical
noise.
-
When deploying the airbag, perform the operation at least 10 m (33 ft) away from the airbag assy.
-
The front seat airbag assy LH is extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling the front seat airbag assy LH with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc.to the front seat airbag assy LH with the deployed airbag.
DISPOSE OF FRONT SEAT AIRBAG ASSY LH (WHEN DISPOSING OF AIRBAG ASSEMBLY DEPLOYMENT METHOD)
NOTE:
-
When disposing of the front seat airbag assy only, never use the customer's vehicle to deploy the air-bag.
-
Be sure to follow the procedure detailed below when deploying the airbag.
HINT: Prepare a battery as the power source to deploy the airbag.
a. Check the function of the SST(s).
CAUTION: When deploying the airbag, always use the specified SST(s): SRS Airbag Deployment Tool.
SST 09082-00700
1. Connect the SST(s) to the battery.
Connect the red clip of the SST(s) to the battery positive (+) terminal and the black clip of the SST(s) to the battery negative (-) terminal.
HINT: Do not connect the yellow connector of the SST(s) which is to be connected with the supplemental restraint system.
