RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1485006.png)
NOTE:
The remaining 5 clips holding the wire harness will be removed when installing the NEW airbag and wire harness.
16.
Install the NEW side airbag assembly.
A.
Place the side airbag into the seat frame with the wire harness in the up direction.
B.
Secure the side airbag with 2 NEW nuts.
Torque: 5.5 N.m (56 kgf.cm, 48 in.lbf)
