RX 330 AWD V6-3.3L (3MZ-FE) (2004)
NOTE:
^
For vehicle with side airbag, the side airbag may NOT be activated normally unless the seatback cover is securely installed.
^
After installing the bracket, check that the strap is NOT twisted.
19.
Attach the seat cover by installing the seat cover hooks to the seat frame.
NOTE:
^
Be careful NOT to damage the cover.
^
Take care to minimize wrinkles as much as possible.
20.
Install the armrest assembly.
A.
Install the armrest with the bolt.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
B.
Install the armrest cap.
21.
Install the front seat assembly.
A.
Place the seat assembly in the cabin.