RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Impact Sensor: Testing and Inspection
Seat Position Airbag Sensor
CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below.If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
The SRS warning light comes on.
-
The vehicle is brought to the work shop for repair purpose due to the accident or collision.
VEHICLES NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.
VEHICLE INVOLVED IN COLLISION
a. Do a diagnostic system check.
b. Do a visual check for damage to the seat position airbag sensor, which includes the following items even if the airbag was not deployed:
-
Cracks, dents or chips in the case
-
Cracks, dents, chips and scratches in the connector