RX 330 AWD V6-3.3L (3MZ-FE) (2004)
a. Check that bearing is not rough or worn.If necessary, replace the bearing.
12. REMOVE GENERATOR DRIVE END FRAME BEARING
a. Remove the 4 screws, and remove the retainer plate.
b. Using SST, tap out the bearing.
SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)
13. INSTALL GENERATOR DRIVE END FRAME BEARING
a. Using SST and a press, press in a new bearing.
b. Install the retainer plate with the 4 screws.
Torque: 2.3 Nm (23 kgf.cm, 20 in.lbf)
SST 09950-60010 (09951-00470), 09950-70010 (09951-07100)