RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Ignition Switch: Service and Repair
IGNITION OR STARTER SWITCH ASSY
REPLACEMENT
HINT: The installation is in the reverse order of the removal.
1. REMOVE FRONT DOOR SCUFF PLATE OUTSIDE LH
2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER
3. REMOVE IGNITION OR STARTER SWITCH ASSY
a. Disconnect the ignition switch connector and unlock warning switch connector.
b. Remove the clamp.
c. Remove the 2 screws and ignition switch.