RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1323006.png)
a. Using SST(s), disconnect the pressure feed tube assy from the steering link assy.
SST 09023-12700
b. Remove the bolt and the pressure feed tube clamp.
14. REMOVE POWER STEERING LINK ASSY
a. Remove the 2 bolts, the nuts and the steering link assy.
15. REMOVE STEERING LEFT TURN PRESSURE TUBE
a. Remove the tube clamp from the turn pressure tubes.
b. Using SST(s), disconnect the left turn pressure tube.
SST 09023-38200
c. Remove the 2 O-rings from the left turn pressure tube.
16. REMOVE STEERING RIGHT TURN PRESSURE TUBE
SST 09023-38200
HINT: Perform the same procedure on the other side.
