RX 330 AWD V6-3.3L (3MZ-FE) (2004)
e. Slide the rear height control compressor bracket to the front of the vehicle, and release the claws A and B from the height control compressor
bracket.
f.
Remove the rear height control compressor w/ bracket assy.
4. REMOVE HEIGHT CONTROL FILTER
a. Remove the clamp, 2 clips and 2 hoses.
b. Remove the height control filter.
5. REMOVE REAR HEIGHT CONTROL COMPRESSOR BRACKET
a. Remove the 3 clamps.
b. Remove the 3 bolts and the 3 height control compressor bush No.2 from the rear height control compressor bracket.
6. REMOVE HEIGHT CONTROL DRYER ASSY
a. Remove the clip and holder.
b. Remove the height control tube No.2 from the height control dryer assy.