RX 330 AWD V6-3.3L (3MZ-FE) (2004)
b. Install the pneumatic shock absorber and 3 nuts.
Torque: 58 Nm (590 kgf-cm, 43 ft. lbs.)
c. Install the pneumatic shock absorber, 2 bolts and nuts.
Torque: 180 Nm (1,840 kgf-cm, 133 ft. lbs.)
NOTICE: When installing the nut, keep the bolt from rotating.
d. 2WD models: Install the flexible hose and skid control sensor wire with the 2 bolts. Connect the skid control sensor connector.
Torque:
Bolt A: 19 Nm (192 kgf-cm, 14 ft. lbs.)
Bolt B: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
e. 4WD models: Install the flexible hose and speed sensor with the 3 bolts.
Torque:
Bolt A: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
Bolt B: 19 Nm (192 kgf-cm, 14 ft. lbs.)
Bolt C: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
f.
Connect the height control tube No.7 and connector No.2 to the pneumatic shock absorber.
8. INSTALL HEIGHT CONTROL SENSOR SUB-ASSY REAR LH