RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-982002.png)
21. REMOVE TRANSAXLE HOUSING OIL SEAL
a. Using a screwdriver with vinyl tape wrapped around its tip, remove the oil seal.
NOTICE: Be careful not to damage the housing.
22. INSTALL TRANSAXLE HOUSING OIL SEAL
a. Using SST(s) and a hammer, drive in a new oil seal.
SST 09649-17010, 09950-70010 (09951-07200)
Oil seal drive in depth: 6.0 ± 0.5 mm (0.236 ± 0.020 inch)
b. Coat the lip of the oil seal with MP grease.
23. INSTALL TRANSFER ASSY
24. INSTALL AUTOMATIC TRANSMISSION W/TRANSFER
25. INSTALL TRANSFER STIFFENER PLATE RH
26. INSTALL FRONT DRIVE SHAFT ASSY RH (4WD DRIVE TYPE)
27. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
