RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Bolt D: 12 mm (0.47 inch)
c. Align the groove of the manual valve with the pin of the lever.
d. Install the 17 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
NOTICE:
^
Push the valve body against the accumulator piston spring and the check ball body to install it.
^
First, temporarily tighten those bolts marked by * in the illustration because they are positioning bolts.
Bolt length:
Bolts A: 41 mm (1.614 inch)
Bolts B: 57 mm (2.244 inch)
Bolts C: 25 mm (0.984 inch)
10. INSTALL VALVE BODY OIL STRAINER ASSY
a. Coat a new O-ring with ATF.
b. Install the O-ring to the oil strainer.
c. Install the oil strainer with the 3 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
11. CONNECT TRANSMISSION WIRE
a. Coat an O-ring with ATF.