RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1055033.png)
15.
Inspect and adjust front wheel alignment.
Refer to TIS:
^
2004 - 2006 model year RX 330 Repair Manual, Suspension - Alignment/Handling Diagnoses - "Front Wheel Alignment: Adjustment".
^
2007 model year RX 350 Repair Manual, Suspension - Front Suspension - "Suspension: Front Wheel Alignment: Adjustment".
16.
Check the ABS speed sensor signal (ABS with EBD & BA & TRAC & VSC system).
Refer to TIS:
^
2004 - 2005 model year RX 330 Repair Manual, Brake - Brake Control/Dynamic Control System - 'ABS With EBD & BA & TRAC & VSC
System: Pre-Check".
^
2006 model year RX 330 Repair Manual, Brake - Brake Control/Dynamic Control System - "Brake Control: Vehicle Stability Control System:
Test Mode Procedure".
^
2007 model year RX 350 Repair Manual, Brake - Brake Control/Dynamic Control System - "Brake Control: Vehicle Stability Control System:
Test Mode Procedure".
17.
Re-initialize any affected power systems. Refer to TIS for the applicable TSIB(s):
^
2004 model year RX 330 vehicles: TSIB No. PG002-03, "Pre-Delivery Service (PDS) Information for RX 330".
^
2005 model year RX 330 vehicles: TSIB No. PD010-05, "Power System Initialization During PDS".
^
2006 model year RX 330 vehicles: TSIB No. PD009-06, "Power System Initialization During PDS".
^
2007 model year RX 350 vehicles: TSIB No. PD007-07, "Power System Initialization During PDS".
Technical Service Bulletin #
TC001-06
Date: 060317
Drivetrain - Transfer Case Extension Housing Seal Leaks
TRANSMISSION & CLUTCH
TC001-06
March 17, 2006
Title:
TRANSFER CASE EXTENSION HOUSING SEAL
Models:
'04 - '05 RX 330 (4WD, NAP Only)
Introduction
Some 2004 - 2005 model year RX 330 vehicles produced in North America, equipped with 4WD, may display evidence of a leak from the transfer case
extension housing seal. Manufacturing processes have been improved to prevent this condition.
Applicable Vehicles
^
2004 - 2005 model year RX 330 vehicles equipped with 4WD and produced in North America BEFORE the Production Change Effective VIN
shown below.
Production Change Information
