RX 330 AWD V6-3.3L (3MZ-FE) (2004)
12. INSTALL WINDSHIELD GLASS RETAINER
a. Install new windshield glass retainer to the glass, as shown in the illustration.
13. INSTALL WINDOW GLASS ADHESIVE DAM
a. Coat the installation part of the dam with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not apply too much primer.
b. Install a new dam, applying double-sided tape all the way around the glass except where the dam is installed, as shown in the illustration.
14. INSTALL WINDSHIELD MOULDING OUTSIDE
a. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not coat the adhesive with Primer G.
-
Do not keep any of the opened Primer G for later use.
b. Install the windshield moulding.