RX 330 FWD V6-3.3L (3MZ-FE) (2006)
/Page-1087001.png)
Ball Joint: Specifications
Ball Joint
Front
As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.
Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.
Turning torque ............................................................................................................................. 0.98 to 3.43 Nm (10 to 35 kgf-cm, 8.7 to 30 inch lbs.)
