RX 350 AWD V6-3.5L (2GR-FE) (2007)
(a)
Connect the hose with an inside diameter of 15 mm (0.59 in.) to the pipe.
(b) Remove the oil filter drain plug from the oil filter cap.
(c)
Insert the pipe with the hose into the oil filter cap.
NOTICE: Be sure to insert the pipe with the O-ring installed on the oil filter cap side.
HINT: Place the hose end into a container before draining the oil from the hose.
(d) Make sure that oil is completely drained, and remove the pipe and O-ring.
HINT: Be sure to turn the pipe in the direction of the arrow to remove it.