RX 350 AWD V6-3.5L (2GR-FE) (2007)
/Page-1375005.png)
a. Remove the bolt and disconnect the No.1 cooler refrigerant suction hose from the compressor and magnetic clutch.
b. Remove the O-ring from the No.1 cooler refrigerant suction hose.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
18. DISCONNECT No.1 COOLER REFRIGERANT DISCHARGE HOSE
a. Remove the nut and bolt, and disconnect the No.1 cooler refrigerant discharge hose from the compressor and magnetic clutch.
b. Remove the O-ring from the No.1 cooler refrigerant discharge hose.
NOTE: Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
19. REMOVE COMPRESSOR AND MAGNETIC CLUTCH
a. Disconnect the connector.
b. Remove the 4 bolts, bracket and the compressor and magnetic clutch.
INSTALLATION
1. INSTALL COMPRESSOR AND MAGNETIC CLUTCH
