RX 350 AWD V6-3.5L (2GR-FE) (2007)
3
When fluid stops coming out, tighten the bleeder plug, then release the brake pedal.
4
Repeat the above bleeding operation until all the air in the fluid is completely bled out.
5
Tighten the bleeder plug completely
Torque: 8.3 Nm (85 kgf-cm, 73 inch lbs.)
6
Repeat the above procedure to bleed the air out of the brake line for each wheel.
11. REMOVE FLUID LEVEL IN RESERVOIR
a. Check the fluid level and add fluid, if necessary.
Fluid: SAE J1703 or FMVSS No. 116 DOT3