RX 350 AWD V6-3.5L (2GR-FE) (2007)
(c)
Using a screwdriver, pry up the lock plate.
(d) Remove the lock nut and the lock plate.
(e)
Remove the 2 bolts and pull out the park/neutral position switch.
INSPECTION
1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
(a)
Apply the parking brake and turn the ignition switch to the ON position.
(b) Depress the brake pedal and check that the engine starts only when the shift lever is in the N or P position and that the engine does not start
when the shift lever is in other positions.
(c)
Check that the back up light comes on and the reverse warning buzzer sounds only when the shift lever is in the R position and the light and
buzzer do not operate when the shift lever is in other positions.
(d) If a failure is found, check the park/neutral position switch for continuity.