RX 350 AWD V6-3.5L (2GR-FE) (2007)
b. Remove the height control tube No. 2 from the height control dryer assembly.
c. Remove the bolt and the height control dryer assembly from the height control compressor assembly.
7. REMOVE HEIGHT CONTROL COMPRESSOR ASSEMBLY
a. Remove the O-ring.
HINT: When the height control compressor assembly is replaced with a new one, it doesn't require a new O-ring.
INSTALLATION
1. INSTALL HEIGHT CONTROL COMPRESSOR ASSEMBLY
a. Coat the O-ring with MP grease, install the height control compressor assembly.
HINT: When the height control compressor assembly is replaced with new one, it doesn't require a new O-ring.
2. INSTALL HEIGHT CONTROL DRYER ASSEMBLY