RX 350 FWD V6-3.5L (2GR-FE) (2010)
Emergency Contact Module: Reading and Clearing Diagnostic Trouble Codes
CELLULAR COMMUNICATION: SAFETY CONNECT SYSTEM: DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Telematics / Trouble Codes.
(e) Check the details of the DTC(s) See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Descriptions/Safety Connect System.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Telematics / Trouble Codes.
(e) Clear the DTCs.