RX 350 FWD V6-3.5L (2GR-FE) (2010)
F. Remove the 2 clips and 2 screws from the bottom of the front bumper assembly.
G. Disengage the 4 claws on each side.
To prevent damage to the front bumper cover; carefully disengage the 4 claws.
H. Using a molding remover disengage the claw under the headlamp.
I.
Disconnect the fog light connector.
J. Disconnect the No.1 ultrasonic sensor connector (with Intuitive Parking Assist System).
K. Disconnect the headlight cleaner hose (with Headlight Cleaner System).
Prepare a drain pan in case washer fluid leaks.