RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Disconnect the 4 oil control valve connectors.
(c) Remove the 4 bolts and 4 oil control valves.
(d) Remove the O-ring from each oil control valve.
Text in Illustration
From 08/2009
2GR-FE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
3. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal.
4. REMOVE NO. 1 ENGINE UNDER COVER
5. DRAIN ENGINE COOLANT See: Cooling System/Coolant/Service and Repair
6. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Removal and Replacement/Front Shock Absorber (w/ Air Suspension)/Removal