RX 350 FWD V6-3.5L (2GR-FE) (2010)
Control Module HVAC: Service and Repair
Installation
Up to 08/2009
HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: INSTALLATION
1. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Install the air conditioning amplifier assembly with the 2 screws.
(b) Connect each connector.
2. INSTALL ECU INTEGRATION BOX See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Parking
Assist Control Module/Service and Repair/Clearance Warning ECU/Installation
3. CONNECT CONNECTOR HOLDER See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Parking Assist
Control Module/Service and Repair/Clearance Warning ECU/Installation
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
5. INSTALL PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal
and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation
6. INSTALL INSTRUMENT PANEL GARNISH RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
9. INSTALL FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Installation
12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: