RX 350 FWD V6-3.5L (2GR-FE) (2010)
Fuel Gauge Sender: Testing and Inspection
2GR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Remove the fuel sender gauge assembly.
(b) Check the operation of the float moving smoothly between F and E.
(c) Measure the resistance between terminals 1 (FE) and 2 (FS) of the connector according to the value(s) in the table below.
Standard Resistance:
HINT
If the value is not as specified, replace the fuel sender gauge assembly.