RX 350 FWD V6-3.5L (2GR-FE) (2010)
4. REMOVE BACK DOOR LOCK COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Removal
6. REMOVE BACK DOOR UPPER TRIM COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
7. REMOVE BACK DOOR UPPER TRIM COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
8. REMOVE BACK DOOR SERVICE HOLE COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
9. REMOVE BACK DOOR SERVICE HOLE COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
10. REMOVE BACK DOOR TRIM PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Disassembly
11. REMOVE POWER BACK DOOR TOUCH SENSOR ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 screws.
(c) Disengage the clip and remove the power back door touch sensor assembly.