RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Using SST, disconnect the height control tube from the pneumatic tank with tube assembly.
SST : 09730-00010
HINT
For the disconnecting procedure of the tube (type 2), refer to Precaution of Suspension Control System See: Service
Precautions/Suspension Control System.
(c) Separate the height control tube from the clamp.
(d) Remove the 2 bolts and pneumatic tank with tube assembly.
6. REMOVE NO. 1 HEIGHT CONTROL TUBE
(a) Remove the 2 holders and No. 1 height control tube.
HINT
For the removing procedure of the tube (type 3), refer to Precaution of Suspension Control System See: Service
Precautions/Suspension Control System.
Up to 08/2009
SUSPENSION CONTROL: PNEUMATIC TANK: INSTALLATION
1. CONNECT NO. 1 HEIGHT CONTROL TUBE
(a) Coat 2 new O-rings with MP grease No. 2.
(b) Install the new O-rings to the No. 1 height control tube.
(c) Install the No. 1 height control tube to the pneumatic tank sub-assembly.
HINT
For the connecting procedure of the tube (type 3), refer to Precaution of Suspension Control System See: Service