RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) If the value is not as specified, replace the shift solenoid valve.
(c) Connect a positive (+) lead from the battery with a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve
connector, and check the operation of the valve.
NOTICE:
When using battery voltage during the inspection, do not bring the positive (+) and negative (-) tester probes too close to each other as
a short circuit may occur.
OK:
The valve moves and makes an operating sound.
(d) If the operation cannot be done as specified, replace the shift solenoid valve.