RX 350 FWD V6-3.5L (2GR-FE) (2010)
1. INSTALL SPEED SENSOR
(a) Coat the 2 bolts with ATF.
(b) Install the speed sensor to the valve body with the 2 bolts.
Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)
(c) Connect the connector.
2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal
and Replacement/U660E Automatic Transaxle/Installation
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/U660E Automatic Transaxle/Installation
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY See: Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/U660E Automatic Transaxle/Installation
5. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY See: Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/U660E Automatic Transaxle/Transaxle Assembly/Installation
6. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT
See the steps from "Install Automatic Transaxle Assembly" through "Install Engine Assembly with Transaxle" See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/U660E Automatic Transaxle/Transaxle Assembly/Installation.