RX 350 FWD V6-3.5L (2GR-FE) (2010)
6. REMOVE HEADLIGHT CLEANER WASHER NOZZLE See: Headlight Cleaner Actuator Cover/Removal
7. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY
(a) Remove the bolt.
(b) Disengage the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.
HINT
Use the same procedure for the RH side and LH side.
Installation
WIPER / WASHER: HEADLIGHT CLEANER ACTUATOR: INSTALLATION
1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY
(a) Engage the 2 claws.
(b) Install the headlight washer actuator sub-assembly with the bolt.
Torque : 1.1 Nm (11 kgf-cm, 10 in-lbf)
HINT
Use the same procedure for the RH side and LH side.
2. INSTALL HEADLIGHT CLEANER WASHER NOZZLE See: Headlight Cleaner Actuator Cover/Installation
3. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
4. INSTALL HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation
5. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. INSTALL ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
7. INSTALL ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and