RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
_hybrid/Page-1024004.png)
5. REMOVE PARKING BRAKE NO. 1 SHOE ASSEMBLY
a. Remove the parking brake shoe hold down spring No. 1 cup, parking brake shoe hold down spring and parking brake shoe hold down spring
No. 2 cup.
b. 2WD: Remove the parking brake shoe hold down spring No. 1 pin.
c. Disconnect the parking brake shoe return tension No. 2 spring and remove the parking brake No. 1 shoe assembly.
6. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET
a. Remove the parking brake shoe adjusting screw set.
b. Remove the parking brake shoe return tension No. 2 spring.
7. REMOVE PARKING BRAKE NO. 2 SHOE ASSEMBLY
a. Remove the parking brake shoe hold down spring No. 1 cup, parking brake shoe hold down spring and parking brake shoe hold down spring
No. 2 cup.
b. 4WD: Remove the parking brake shoe hold down spring No. 2 pin.
c. Remove the parking brake No. 2 shoe assembly.
d. Using needle-nose pliers, disconnect the parking brake No. 3 cable assembly from the parking brake cable shoe lever.
NOTICE: Be careful not to damage parking brake No. 3 cable assembly.
