RX 400h AWD V6-3.3L (3MZ-FE) Hybrid (2007)
5. Connect the battery room ventilation hose between the HV batteries LH and CTR.
NOTE: Align the projections of the battery room ventilation hose and the rubber tube, and install the hose.
3. INSTALL BATTERY SMART UNIT
4. CHECK HIGH VOLTAGE CABLE CONNECTION
5. INSTALL BATTERY COVER SUB-ASSEMBLY
6. INSTALL HV BATTERY SERVICE HOLE COVER
7. INSTALL BATTERY CARRIER DUCT
8. INSTALL BATTERY CARRIER BRACKET
9. INSTALL REAR CENTER SEAT INNER BELT
10. INSTALL FLOOR CARPET ASSEMBLY FRONT
11. INSTALL AIR INTAKE COVER CENTER
12. INSTALL AIR INTAKE COVER
13. INSTALL REAR SEAT ASSEMBLY LH
14. INSTALL REAR SEAT TRACK BRACKET COVER
15. INSTALL REAR SEAT ASSEMBLY RH
16. INSTALL REAR SEAT TRACK BRACKET COVER
17. INSPECT SLIDE ADJUSTER LOCK SIMULTANEOUSLY
18. INSTALL SERVICE PLUG GRIP
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
20. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.