RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
b. Reflector (SST) placement
1. Measure the height from the ground to the center of the laser luminous portion.
2. Adjust the center height of the reflector 48 mm (1.89 in.) higher than the center of the luminous portion.
SST 09870-60000 (09870-60010, 09870-60020)
NOTE: Adjust the height as precisely as possible.
3. From the center (center of the emblem) of the front and rear bumpers, hang down the string with the plumb bob and mark the center points
(both front and rear) of the vehicle on the ground surface.