RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
_hybrid/Page-766103.png)
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
12. CHECK RAIN SENSOR
a. Disconnect the R7 sensor connector.
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
13. CHECK MULTIPLEX NETWORK MASTER SWITCH
a. Disconnect the P22 switch connector.
Part 1
