RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
11. REMOVE COWL TOP VENTILATOR LOUVER SUBASSEMBLY
12. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
13. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER
14. REMOVE COOL AIR INTAKE DUCT SEAL
15. REMOVE AIR CLEANER CAP W/INLET
16. REMOVE AIR CLEANER CASE W/RESONATOR
17. REMOVE EMISSION CONTROL VALVE SET
18. REMOVE INTAKE AIR SURGE TANK
19. DISCONNECT RADIATOR HOSE INLET
20. REMOVE IGNITION COIL ASSEMBLY
21. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
a. Remove the 2 engine wire harness clamps.
b. Remove the 3 nuts and disconnect the engine wire harness.
c. Remove the 9 bolts and the cylinder head cover.
22. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY LH
a. Using an E6 Torx socket wrench, remove the 2 bolts and disconnect the engine wire harness protector.
b. Remove the 2 engine wire harness clamps.
CAUTION: Wear insulating gloves.