RX 400h FWD V6-3.3L (3MZ-FE) Hybrid (2006)
Shifter CVT: Adjustments
SHIFT LEVER
ADJUSTMENT
1. INSPECT SHIFT LEVER POSITION
a. Apply the parking brake.
b. Lock the wheels with chocks to secure the vehicle.
c. Put the vehicle into the READY-on state.
d. Move the shift lever to the D position and release the brake pedal.
NOTICE: Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.
e. Slowly move the shift lever to the N position and measure moving distance (A) of the shift lever from the original point to the gear activation
point.
NOTICE: Be sure to move the shift lever slowly.
f.
Move the shift lever to the R position and release the brake pedal.
NOTICE: Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.
g. Slowly move the shift lever to the N position and measure moving distance (B) of the shift lever from the original point to the vehicle
activation point.
NOTICE: Be sure to move the shift lever slowly.
h. Check that moving distances (A) and (B) shown in the illustration are almost the same.
HINT: If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.
^
If moving distance (A) is shorter than (B), perform adjustment of the shift lever position [*1].
^
If moving distance (B) is shorter than (A), perform adjustment of the shift lever position [*2].
2. ADJUST SHIFT LEVER POSITION