RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(a) Disconnect the connector.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
(b) Disengage the 2 claws as shown in the illustration and release the lock and remove the No. 1 ultrasonic sensor.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
5. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Back Sensor)
(a) Disengage the 2 claws and remove the No. 1 ultrasonic sensor retainer.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
6. REMOVE NO. 1 ULTRASONIC SENSOR (for Corner Sensor)
(a) Disconnect the connector.
HINT
Use the same procedure for the RH side and the LH side.
(b) Disengage the 2 claws as shown in the illustration and release the lock and remove the No. 1 ultrasonic sensor.
HINT
Use the same procedure for the RH side and the LH side.
7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (for Corner Sensor)
(a) Disengage the 2 claws and remove the No. 1 ultrasonic sensor retainer.