RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Amplifier: Service and Repair
Installation
AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION
1. INSTALL NO. 1 AMPLIFIER BRACKET
(a) Install the No. 1 amplifier bracket with the 2 bolts.
Torque : 4.8 Nm (49 kgf-cm, 43 in-lbf)
2. INSTALL NO. 2 AMPLIFIER BRACKET
(a) Install the No. 2 amplifier bracket with the 2 bolts.
Torque : 4.8 Nm (49 kgf-cm, 43 in-lbf)
3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET
(a) Install the stereo component amplifier assembly with bracket with the bolt and nut.
Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the 4 connectors.
4. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY
(a) Install the rear seat sub floor panel assembly with the 4 bolts.
Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Engage the 6 clamps to install the wire harness.
(c) Connect the connector.
5. INSTALL NO. 2 DECK BOARD REINFORCEMENT
(a) Install the No. 2 deck board reinforcement with the 3 bolts.