RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Replacement/Removal
6. REMOVE NO. 1 ULTRASONIC SENSOR
(a) Disengage the 2 claws to release the lock as shown in the illustration and remove the No. 1 ultrasonic sensor.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER
(a) Disengage the 2 claws and remove the No. 1 ultrasonic sensor retainer.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
Installation
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): INSTALLATION
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
(a) Temporarily install the No. 1 ultrasonic sensor retainer to the front bumper.
Text in Illustration
NOTICE:
*
Do not damage the front bumper with the protrusion when installing the retainer.
*
Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front
bumper.
HINT
*
When installing the retainer, align the keyhole and protrusion as shown in the illustration.
*
The illustration is for the LH side. The RH side is the opposite of the LH side.
(b) Engage the 2 claws to install the No. 1 ultra sonic sensor retainer.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
2. INSTALL NO. 1 ULTRASONIC SENSOR