RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(b) Remove the 4 screws.
(c) Remove the 2 bolts and 3 clips.
(d) Disengage the 2 claws and remove the No. 2 luggage compartment side cover protector.
2. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Steering and Suspension/Suspension/Suspension Control (
Automatic - Electronic )/Compressor/Pump/Service and Repair/Removal
3. REMOVE REAR BUMPER ASSEMBLY
(a) Put protective tape around the rear bumper assembly.
Text in Illustration
(b) Using a clip remover, remove the 2 clips.
(c) Remove the 2 screws and 2 rear bumper upper stoppers.
(d) Remove the screw.
HINT
Use the same procedure for the RH side and LH side.