RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
8. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Vehicle Interior/Door Courtesy
Light/Removal
9. REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION
(a) Remove the screw and No. 1 front door stiffener cushion.
10. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
(a) Remove the 3 screws.
(b) Using a clip remover, disengage the 10 clips and front door trim board retainer.
Text in Illustration
(c) Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
(d) Raise the front door trim board sub-assembly to disengage the 4 claws and remove the front door trim board sub-assembly together with the
front door inner glass weatherstrip.
(e) Disconnect each connector.
(f) Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.