RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Front Door Window Glass: Service and Repair
Installation
WINDOW / GLASS: FRONT SIDE FIX WINDOW GLASS: INSTALLATION
1. CLEAN FRONT SIDE FIX WINDOW ASSEMBLY
(a) Clean the outer edges of the front side fix window assembly with a non-residue solvent.
NOTICE:
*
Do not touch the glass surface after cleaning it.
*
Be careful not to damage the glass or clips.
2. INSTALL FRONT SIDE FIX WINDOW ASSEMBLY
(a) Using a brush or a sponge, apply Primer M to the exposed part of the vehicle body.
NOTICE:
*
Do not coat the adhesive with Primer M.
*
Do not apply too much primer.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
(b) Using a brush or a sponge, apply Primer G to the contact surface of the front side fix window assembly.
HINT
If an area other than that specified, wipe off the primer with a non-residue solvent before it dries.
NOTICE:
*
To prevent the glass from breaking at low temperatures, ensure that no primer adheres to the contact surface between the
moulding and glass during application.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
*
Do not apply too much primer.